Training Material Siemens Complete

Training material downloads

Hi, Blogger. Dibawah ini merupakan links complete dari siemens untuk Training. Silahkan anda download untuk belajar total PLC Siemens.

0	Guide for tutorial material This module provides an overview of the learning goals and technical requirements of the individual modules as well as their assignment to the corresponding courses. Tutorial material WORD Tutorial material PDF
A1	Totally Integrated Automation (TIA) The “Totally Integrated Automation (TIA)” module introduces the Siemens AG solution concept of the same name. Tutorial material WORD Tutorial material PDF
A2	Installation of STEP 7 Professional V5.x / Authorization Process This module describes how the STEP 7 V5.x software is installed and the interface to the S7-300 is set up. Tutorial material WORD Tutorial material PDF
A3	“Startup” PLC programming with STEP 7 In this module, the reader will learn how to program a programmable logic controller (PLC) using the STEP 7 programming tool. The module teaches the fundamentals and shows the procedure on the basis of a detailed example (fast access). Tutorial material WORD Tutorial material PDF S7 Project (.arj)
A4	Programming the CPU 315-2 DP In this module, the reader learns how to create the hardware configuration for the CPU 315-2 DP and how to write and test a STEP 7 program. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
A5	Programming the CPU 314C-2 DP In this module, the reader learns how to create the hardware configuration for the CPU 314C-2 DP and how to write and test a STEP 7 program. The module demonstrates the basic procedure.
A6	PLC simulation with S7-PLCSIM In this module, the reader should learn how to test a STEP 7 program using the S7-PLCSIM simulation software. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
A7	Saving / archiving / program documentation In this module, the reader is familiarized with the tools for program documentation and for saving STEP 7 programs. Tutorial material WORD Tutorial material PDF S7 Project
A8	Test and online functions In this module, the reader learns about tools that will assist in troubleshooting. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
B1	Error diagnostics / error handling In this module, the reader is acquainted with the procedure for error diagnostics. Tutorial material WORD Tutorial material PDF S7 Project
B2	Analog value processing The reader learns how analog values are read into a SIMATIC S7, processed and output. Tutorial material WORD Tutorial material PDF
B3	Control engineering with STEP 7 In the subsequent steps, the reader learns how a PID controller is integrated into a STEP 7 program, interconnected with analog process variables and commissioned.
B4	Data blocks The reader learns how a data block is used for storing data. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
B5	Structured programming with function blocks The reader learns how a function block is created with internal variables for structured programming. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
B6	Conversion from STEP 5 => STEP 7 In this module, the reader is acquainted with the tool, with which STEP 5 programs are converted into executable STEP 7 programs. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
C1	Step sequence programming with S7-GRAPH In this module, the reader learns to program a sequence control with the graphical programming tool S7-GRAPH. Tutorial material WORD (Part 1) Tutorial material WORD (Part 2) Tutorial material PDF (Part 1) Tutorial material PDF (Part 2) S7 Project (.arj)
C2	Programming in high-level languages with S7-SCL In this module, the reader is acquainted with the fundamental functions of the S7-SCL development environment.
D1	AS-Interface with SIMATIC S7-300 and the CP342-2 / CP343-2 In this module, the reader is acquainted with the essential functions of the AS-Interface CP342-2 for the S7-300. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
D2	AS-Interface / integration of a LOGO!12/24RC logic module and AS-I interface module In this module, the reader is acquainted with the essential functions of the LOGO! logic module 12/24RC with a communication module to the AS interface. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
D3	PROFIBUS DP with Master CPU 315-2 DP / Slave ET 200L In this module, the reader learns how the PROFIBUS DP is commissioned with the CPU 315-2 DP as master and the ET 200L as slave. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
D4	PROFIBUS DP with Master CPU 315-2 DP / Slave ET 200M In this module, the reader learns how the PROFIBUS DP is commissioned with the CPU 315-2 DP as master and the ET 200M as slave. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
D5	PROFIBUS DP with Master CPU 315-2 DP / Slave ET 200S In this module, the reader learns how the PROFIBUS DP is commissioned with the CPU 315-2 DP as master and the ET 200S with integrated CPU as slave. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
D6	PROFIBUS DP with Master CPU 315-2 DP / Slave CPU 315-2DP In this module, the reader learns how the PROFIBUS DP is commissioned with the CPU 315-2 DP as master and a CPU 315-2DP as slave. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
D7	PROFIBUS DP with Master CPU 315-2 DP / Slave MICROMASTER Vector In this module, the reader learns how the PROFIBUS DP is commissioned with the CPU 315-2 DP as master and the MICROMASTER Vector as slave.
D8	PROFIBUS DP with Master CPU 315-2 DP / Slave MICROMASTER 420 In this module, the reader learns how the PROFIBUS DP is commissioned with the CPU 315-2 DP as master and the MICROMASTER 420 as slave.
D9	Programming of SIMATIC WinAC In this module, the reader learns how to program and parameterize the WinAC soft-PLC. This puts the PROFIBUS DP into service with WinAC as master and the ET 200L as slave.
D10	PROFIBUS DP with Master CP 342-5 DP / Slave ET 200L In this module, the reader learns how the PROFIBUS DP is commissioned with an S7-300with the CPU-342-5 DP communication processor as master and the ET 200L as slave. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
D11	PROFIBUS DP with Master CP 342-5 DP / Slave CP 342-5 DP In this module, the reader learns how the PROFIBUS DP is commissioned with one S7-300 with the CPU-342-5 DP communication processor as master and another as the slave. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
D12	PROFIBUS DP with Master CP 342-5 DP / Master CP 342-5 DP In this module, the reader learns how an FDL connection on the PROFIBUS DP is commissioned with two S7-300s with the CPU-342-5 DP communication processor as master. Tutorial material WORD Tutorial material PDF S7 Project (.arj)
D13	ASIsafe with the SIMATIC S7-300 and the AS-interface safety monitor In this module, the reader learns how a safety-related application on the AS-interface (ASIsafe) is commissioned. This uses the safety monitor device at the AS interface.
D14	PROFIsafe with Master CPU 315F-2 PN/DP / Slave ET 200S In this module, the reader learns how a safety-related application on PROFIBUS (PROFIsafe) is commissioned. In this case, the CPU 315F-2 PN/DP is used on the PROFIBUS as master with an ET 200S as slave.
D15	PROFIBUS and Safety Integrated with Master CPU 315F-2 DP / Slave ET 200S F-CPU In this module, the reader learns how a safety-related application on PROFIBUS (PROFIsafe) is commissioned. In this case, the CPU 315F-2 DP is used on the PROFIBUS as master with an ET 200S F-CPU as slave.
E1	Ethernet communication with CP343-1 IT In this module, the reader learns how an ISO connection is commissioned on the Ethernet between two S7-300s with the CPU-342-1 IT communication processor.
E2	Web technologies of the CP343-1 IT In this module, the reader is acquainted with the application options and use of web technologies in automation systems. The necessary steps for this are represented on the basis of a “CP343-1 IT” module. As an example, the visualization of a tank is used, in which the current process values can not only be displayed, but also modified. In addition, the specified tank applet is extended with further functions in order to obtain an insight into the development of user-defined applets.
E3	Internet connection for CP343-1 IT In this module, the reader is acquainted with the options and techniques for connecting programmable logic controllers to the Internet. The necessary steps for this are represented using the example of a “CP343-1 IT” module and a Bintec ISDN router.
E4	PROFINET with IO controller CPU 315F-2 PN/DP and IO device ET 200S In this module, the reader learns how PROFINET is commissioned with the CPU 315F-2 PN/DP as IO controller and the ET 200S as IO device.
E5	PROFINET with IO controller CPU 343-1 Advanced and IO device ET 200S In this module, the reader learns how PROFINET is commissioned with the CP343-1 Advanced as IO controller and the ET 200S as IO device.
E6	PROFINET/PROFIBUS DP with CPU 315F-2 PN/DP, IE/PB Link and DP slave ET 200S In this module, the reader learns how PROFIBUS DP components can be integrated with PROFINET. It shows how the CPU 315F-2 PN/DP is commissioned with the IE/PB link as network transition and an ET200S as DP slave.
E7	Diagnostics on the PROFINET with CPU 315F-2 PN/DP IO controller / SCALANCE X208 switch and ET 200S IO device In this module, the reader learns how diagnostics can be performed objectively on the PROFINET. This uses a configuration with a CPU 315F-2 PN/DP as IO controller, the ET 200S as IO device and a diagnostics-capable SCALANCE X208 switch.
E8	PROFINET with IO controller PC + SOFTNET PN IO software and ET 200S IO device In this module, the reader learns how PROFINET is commissioned with a PC and the SOFTNET PN IO software as IO controller and the ET 200S as IO device.
F1	Operator control and monitoring with OP7 and ProTool In this module, the reader is acquainted with the programming of the ProTool configuration software and the essential functions of the OP7 operator panel with integral interface to the MPI or PROFIBUS DP.
F2	Operator control and monitoring with TP170A and ProTool In this module, the reader is acquainted with the programming of the ProTool configuration software and the essential functions of the TP170A touch panel with integral interface to the MPI or PROFIBUS DP.
F3	Operator control and monitoring with ProTool/Pro Runtime In this module, the reader is acquainted with the essential functions of the ProTool/Pro Runtime software. Typical applications as processed on a sample machine.
F4	Operator control and monitoring with WinCC In this module, the reader is acquainted with the essential functions of the WinCC software. Typical applications as processed on a sample system.
F5	Operator control and monitoring with WinCC V6 In this module, the reader is acquainted with the essential functions of the WinCC V6.0 software. Typical applications as processed on a sample system.
F6	Operator control and monitoring with WinCC flexible and the TP177B Color In this module, the reader is acquainted with the essential functions of the WinCC Flexible 2005 software. Typical applications as processed on a sample system.
G1	“Startup” plant simulation with SIMIT SCE In this module, the reader learns how to use the SIMIT software tool. The module describes the fundamental principles and demonstrates how to handle and create projects on the basis of detailed examples (fast access).
App. I	Fundamentals of PLC programming with SIMATIC S7-300 This document should provide an overview of the SIMATIC S7-300 automation system and the associated STEP 7 programming software. As the fundamental principles are laid down in this Appendix, there are no special requirements. Tutorial material WORD Tutorial material PDF
App. II	IEC 61131 In this Appendix, the reader obtains information on the international standard IEC 61131. As these are theoretical principles, there are no special preconditions. Tutorial material WORD Tutorial material PDF
App. III	Basic programming instructions LAD/FBD/STL in STEP 7 This Appendix provides the reader with a collection of the most important programming instructions that are required for performing the programming tasks in all the modules. In order that the commands and programming method can be understood, this requires knowledge of the fundamentals of PLC programming (e.g. Appendix I: Fundamentals of PLC programming with SIMATIC S7-300). Tutorial material WORD Tutorial material PDF
App. IV	Fundamentals of fieldbus systems with SIMATIC S7-300 This module gives a general overview of fieldbus systems and describes the integrated bus systems of the S7-300 automation system, MultiPoint Interface (MPI), AS-Interface and PROFIBUS. Tutorial material WORD Tutorial material PDF Brief desription
App. V	Fundamentals of network technology This Appendix provides the reader with an introduction to the Ethernet or Internet technologies that are required in order to understand modules E1-E3.

Read Full Post »

Electrical engineer: Mengenal Software EPLAN Electric P8 v1.9.5.3231

Jika anda seorang electrical engineer yang merancang sistem kontrol di dunia industri, sudah selayaknya anda tahu software ini. Software ini sangat banyak digunakan oleh perusahaan-perusahaan pembuat mesin-mesin industri.

EPLAN Electric P8 v1.9.5.3231

Electrical computer-aided design as the vanguard of the times, since 1984, EPLAN has been planning for the electrical, engineering and project management in the field to provide intelligent software solutions and professional services to global enterprises mark. EPLA N Cabinet, EPLAN product family is not only the leadership of the global market, has now become the industry standard electrical design of the world’s family of CAE software, but also to the electrical control cabinet for 3D design EPLA N Cabinet, for fluid EPLAN Fluid Engineering and Process industries such as EPLAN PPE Products.

EPLAN Electric P8 EPLAN Electric P8

Unmatched speed and change: macro variables Technology

The new technology of the macro variables can greatly reduce design time and heavy users to avoid duplication of work. All of the local circuit will be able to create a macro in the form of macro variables in the creation and preservation. In this way, the correct size of the circuit can be in a few seconds of time to be elected. These macros are easy to manage, modify the circuit and has been re-set the size of the new projects from. Because of this new technology, users in the trial version of the test shows that can save up to 50% of the time.

Easy integration: at the last minute changes can easily cope with the

Few projects can escape at the last minute change destiny. Through EPLAN Electric P8, such changes can select the appropriate variables have been integrated and reliable, we do not need to re-design. In this way, data recording can always be consistent, and potential sources of error can be reduced to a minimum.

” The best of both worlds: “The graphics-oriented,” combined with “object-oriented”

Is a graphics-oriented or object-oriented? In the past, CAE users need both to make a choice between the methods of work. EPLAN Electric P8 provides users with the graphics-oriented and object-oriented method of switching between the freedom – the very characteristics of the utility because the graphics-based work methods are usually more appropriate to the beginning of the project, and object-oriented In the latter part of the regular methods will reveal its important role. The new system recognizes the fact that allows users to the same project, simply switch.

Simple data exchange: from design to the Department of the Office of the
EPLAN each record can be transferred to Excel spreadsheet form. In this way, the system has become a support and other IT systems simple general-purpose tool for data exchange – thus ensuring that the area outside the CAE has the same database. In addition, by accelerating from the initial design to finished product between the various process, the solution also allows for faster processing of large quantities of data.

Global Network: The Working Group works

EPLAN Electric P8 through the work group can work across networks, across sites, and even across national boundaries – any number of users at the same time to participate in the same project. EPLAN Electric P8 supports all international standards. System definition of standardized template to assess the different forms and symbols of the mapping database, and the system automatically convert existing projects to the selected criteria.

No language barriers

Because of its ability to support Unicode of the same, EPLAN Electric P8 to a variety of languages circuit – from Chinese to Russian wiring diagram of the bill of materials, everything can be translated on-line or after the completion of the work. Users simply by his mother for project planning, will be translated into specific instructions. This is not only international cooperation can be simplified, and make it easier to produce the documents.

What the public wants you to vote: interface Configurator

EPLAN Electric P8 interface to configure the device not only to support the requirements of the user interface and personalized support this change, and allows configuration and the preservation of individual tasks and stage work. For each phase of the editors, relevant information can visit. Even occasional users can also quickly the product of careful handling because the toolbar can be reduced to a few key features.

Ideally links to the integration process

Because of its unified interface, such as ODBC, XML, or Excel, from the upper reaches of the process data can be quickly EPLAN Electric P8 transmission and processing. The results data directly from the lower reaches of the process of access, such as the production. This will not only speed up the work of the running, and to improve the quality of design and production process.

” Use immediately: “The installation and start”

Flexible system configuration and management means that the new user habits and different users can immediately start using. EPLAN Project Manager to provide users with an aide to accompany the user experience of the entire project, to provide users with a variety of opportunities and decision-making way to explain the various options. In this way, users will be able to take advantage of this software and the full performance at any time to maintain the overall lead.

Platform strategy: with other applications to communicate

EPLAN Electric P8 platform with revolutionary technology, which not only support from EPLAN 5 and EPLAN 21 for 100% of data transmission, and support for the horizontal and vertical expansion. For electrical engineering, fluid engineering and instrumentation / control of a variety of technical applications for the first time be able to carry out direct communication with each other. The platform features a number of modules, for example, projects and user rights management module, which has a multi-disciplinary basis for the application.

Summary: The new space

EPLAN Electric P8 to open the project in the field of new space. With a very rich family-oriented features and object-oriented graphics and the freedom to choose, the software provides clear guidance technology. A variety of configuration options for simplifying the personalized best meet the requirements of the process. In addition, the fluid engineering and instrumentation / control technology to provide direct links to a shared platform engineering, IT and infrastructure integration can be a simple process of integration of the pioneers. Last but not least, renowned EPLAN to ensure the quality of continuous long-term development and the future of the new system of security

EPLAN Software and Services

EPLAN Software and Services is the world’s engineering software solutions provider. All of the work to develop advanced and highly efficient work flow and processes to support the center. From a wealth of customer service benefit, including training, consulting and customer solutions. With 20,000 customers worldwide and 54,000 sets of the number of installed software, the Mengerhaimu set up in the city has shown its more than 20 years of practical consensus-oriented and international distribution of success. As a Rittal subsidiary and part of the Friedhelm Loh Group, EPLAN software and services company has become the name of the investment and durability synonymous with security.

Read Full Post »

Electrical engineer: Mengenal Software EPLAN Electric P8 v1.9.5.3231

Jika anda seorang electrical engineer yang merancang sistem kontrol di dunia industri, sudah selayaknya anda tahu software ini. Software ini sangat banyak digunakan oleh perusahaan-perusahaan pembuat mesin-mesin industri.

EPLAN Electric P8 v1.9.5.3231

Electrical computer-aided design as the vanguard of the times, since 1984, EPLAN has been planning for the electrical, engineering and project management in the field to provide intelligent software solutions and professional services to global enterprises mark. EPLA N Cabinet, EPLAN product family is not only the leadership of the global market, has now become the industry standard electrical design of the world’s family of CAE software, but also to the electrical control cabinet for 3D design EPLA N Cabinet, for fluid EPLAN Fluid Engineering and Process industries such as EPLAN PPE Products.

EPLAN Electric P8 EPLAN Electric P8

Unmatched speed and change: macro variables Technology

The new technology of the macro variables can greatly reduce design time and heavy users to avoid duplication of work. All of the local circuit will be able to create a macro in the form of macro variables in the creation and preservation. In this way, the correct size of the circuit can be in a few seconds of time to be elected. These macros are easy to manage, modify the circuit and has been re-set the size of the new projects from. Because of this new technology, users in the trial version of the test shows that can save up to 50% of the time.

Easy integration: at the last minute changes can easily cope with the

Few projects can escape at the last minute change destiny. Through EPLAN Electric P8, such changes can select the appropriate variables have been integrated and reliable, we do not need to re-design. In this way, data recording can always be consistent, and potential sources of error can be reduced to a minimum.

” The best of both worlds: “The graphics-oriented,” combined with “object-oriented”

Is a graphics-oriented or object-oriented? In the past, CAE users need both to make a choice between the methods of work. EPLAN Electric P8 provides users with the graphics-oriented and object-oriented method of switching between the freedom – the very characteristics of the utility because the graphics-based work methods are usually more appropriate to the beginning of the project, and object-oriented In the latter part of the regular methods will reveal its important role. The new system recognizes the fact that allows users to the same project, simply switch.

Simple data exchange: from design to the Department of the Office of the
EPLAN each record can be transferred to Excel spreadsheet form. In this way, the system has become a support and other IT systems simple general-purpose tool for data exchange – thus ensuring that the area outside the CAE has the same database. In addition, by accelerating from the initial design to finished product between the various process, the solution also allows for faster processing of large quantities of data.

Global Network: The Working Group works

EPLAN Electric P8 through the work group can work across networks, across sites, and even across national boundaries – any number of users at the same time to participate in the same project. EPLAN Electric P8 supports all international standards. System definition of standardized template to assess the different forms and symbols of the mapping database, and the system automatically convert existing projects to the selected criteria.

No language barriers

Because of its ability to support Unicode of the same, EPLAN Electric P8 to a variety of languages circuit – from Chinese to Russian wiring diagram of the bill of materials, everything can be translated on-line or after the completion of the work. Users simply by his mother for project planning, will be translated into specific instructions. This is not only international cooperation can be simplified, and make it easier to produce the documents.

What the public wants you to vote: interface Configurator

EPLAN Electric P8 interface to configure the device not only to support the requirements of the user interface and personalized support this change, and allows configuration and the preservation of individual tasks and stage work. For each phase of the editors, relevant information can visit. Even occasional users can also quickly the product of careful handling because the toolbar can be reduced to a few key features.

Ideally links to the integration process

Because of its unified interface, such as ODBC, XML, or Excel, from the upper reaches of the process data can be quickly EPLAN Electric P8 transmission and processing. The results data directly from the lower reaches of the process of access, such as the production. This will not only speed up the work of the running, and to improve the quality of design and production process.

” Use immediately: “The installation and start”

Flexible system configuration and management means that the new user habits and different users can immediately start using. EPLAN Project Manager to provide users with an aide to accompany the user experience of the entire project, to provide users with a variety of opportunities and decision-making way to explain the various options. In this way, users will be able to take advantage of this software and the full performance at any time to maintain the overall lead.

Platform strategy: with other applications to communicate

EPLAN Electric P8 platform with revolutionary technology, which not only support from EPLAN 5 and EPLAN 21 for 100% of data transmission, and support for the horizontal and vertical expansion. For electrical engineering, fluid engineering and instrumentation / control of a variety of technical applications for the first time be able to carry out direct communication with each other. The platform features a number of modules, for example, projects and user rights management module, which has a multi-disciplinary basis for the application.

Summary: The new space

EPLAN Electric P8 to open the project in the field of new space. With a very rich family-oriented features and object-oriented graphics and the freedom to choose, the software provides clear guidance technology. A variety of configuration options for simplifying the personalized best meet the requirements of the process. In addition, the fluid engineering and instrumentation / control technology to provide direct links to a shared platform engineering, IT and infrastructure integration can be a simple process of integration of the pioneers. Last but not least, renowned EPLAN to ensure the quality of continuous long-term development and the future of the new system of security

EPLAN Software and Services

EPLAN Software and Services is the world’s engineering software solutions provider. All of the work to develop advanced and highly efficient work flow and processes to support the center. From a wealth of customer service benefit, including training, consulting and customer solutions. With 20,000 customers worldwide and 54,000 sets of the number of installed software, the Mengerhaimu set up in the city has shown its more than 20 years of practical consensus-oriented and international distribution of success. As a Rittal subsidiary and part of the Friedhelm Loh Group, EPLAN software and services company has become the name of the investment and durability synonymous with security.

Read Full Post »

Electrical Engineer: Mengenal Sofware Eplan Fluid V1.8.4

Apakah anda tahu software EPLAN?

Mendingan baca yuk, biar kenal.

EPLAN Fluid 1.8.4

EPLAN Fluid supports fluid engineering with automated documentation. Simple handling, numerous test functions, and standard support make your design efficient – from now on the system assumes time-consuming standard tasks.

Compared with conventional, mostly CAD-based systems EPLAN Fluid comes with unique logic functions and automatisms that accelerate your fluid planning. The modern user interface with extensive drawing functions helps you familiarize yourself with its full potential – of course with the complete data stock from the predecessor system fluidPLAN. The autoconnect function applies to all connections that can be provided andanalyzed with logical properties. This means you have an overview of all components, including the small parts like connectors, hoses, and pipes – and therefore a firm grip on the costs!

The new Engineering platform is your key to the future, providing core functions for fluid, electrical, measuring, and control engineering as well as CAE for electrical systems. Based on a unified platform all systems are suppliedfrom the same database. From now on multiple data entries and inconsistencies are history.

Besides a unified database the platform also includes basic functions like thegraphical editor (for circuit diagrams, fluid plans, process control group plans), a unified rights management, the viewer, online/offline foreign language transla-tions, and the comprehensive audit system. The unique framework concept deliversimpressively fast results – not least of all owing to the unified look & feel throughout all applications.

Kunjungi situsnya dan dapat informasi lengkap di http://www.eplan.us

Read Full Post »

Lowongan Kerja di EXXON Mobil

Exxon Mobil Corporation and its subsidiaries have a substantial presence in approximately 200 countries and territories around the world and are leaders in almost every aspect of the petroleum and petrochemical Industries. ExxonMobil started its groundbreaking work in Indonesia in1968 with multibillion dollar investments, and has since helped thecountry grow into a global energy supplier.

Energetic, commercially astute lawyers are required for two exciting positions, which will involve a broad range of work across all of ExxonMobil supstream oil and gas interests and emerging opportunities in Indonesia. In supporting these interests, the roles will include drafting and negotiating commercial agreements and related documents concerningexploration, development and production operations and providing legaladvice with respect to various aspects of those operations. Over time this broad range of legal work, may include drafting and negotiating production sharing contracts, joint operating, unitization, farm-in,and gas sales agreements, as well as providing litigation and compliance support.

The ideal candidate will be a senior associate level legal counsel, who offers quality business law
experience currently working in a major law firm or In-house legal department.

While specific experience in providing legal support for upstream oil and gas operations will be well regarded, it is not essential, as training will be provided.

Excellent oral and written communication skills In Indonesian and English are arequirement. Strong relationship building skills self-confidence,flexibility, initiative and a strategic, pragmatic approach areessential.

This is an exceptional opportunity to join a highly respected international company offering good career advancement.

The successful candidates will be based in Jakarta.

Candidates should send their application consisting of a cover letter and a résumé both written in English to:

law.recruitment@exxonmobil.com

Applications close 8 February 2009.

No individual shall be authorized to use the ExxonMobil name and logo in an attempt to solicit up-front fees from the interested job-seekers. ExxonMobil shall not charge candidates for application fee(s) of any kind whatsoever in this respect.

ExxonMobil Taking on the world’s toughest energy challenges.

Read Full Post »

Lowongan Kerja D3 Elektro di PT Arnotts Indonesia (close 10 Feb 2009)

BE PART OF THE WINNINGTEAM

PT Arnott’s Indonesia is a subsidiary of Campbell Soup Company manufacturing food and biscuits and known for high quality products and famous brands for both domestic and export markets such as GOOD TIME, TIM TAM, NYAM NYAM, STIKKO, VENEZIA & PRESTIGE. We invite qualified professionals for the position of:

INSTRUMENT ENGINEER (IE)

This position will responsible for the design of the electrical, process control and safety systems.

Job qualifications:

• Min diploma graduate in Electrical or Physical Instrumentation Engineering.
• Min. 2 years experiences in Electrical fields, preferable in Food manufacturing.
• Strong knowledge in Programming SCADA, Allen Bradley or Siemens PLC.
• Strong analytical and problem solving skills.
• Good in time management, planning and organizing skills.
• Ability to work under pressures and good interpersonal skill with all site, project team and vendors.
• Able to speak and written in English.
• Willing to be located in Bekasi.

We offer competitive compensation package and career opportunities for successful applicant. Please submit your application letter, a concise resume, and photograph to the email address below within 2 (two) week from publication of this ad. Put the code of position (IE) on the email subject. Only short listed candidates will be contacted.

E-mail: hrd_recruitment@arnotts.com

Read Full Post »

Hunting: Buku SolidWorks 2007 Bible

Tahukah anda apa itu SolidWorks? Solidwork merupakan salah satu software engineering yang banyak digunakan untuk aplikasi pembuatan rancang desain dalam bentuk 3D. Solidwork ini merupakan pesaing Autodesk Inventor.

Ingin belajar dan mengetahui lebih banyak tentang SolidWork, Silahkan download bukunya.

Buku ini di dapat setelah hunting di server file sharing. Selamat Mendownload.

Matt Lombard “SolidWorks 2007 Bible”
Wiley | 2007-04-30 | ISBN: 0470080132 | 1104 pages | PDF | 31,8 MB

“The most complete resource for SolidWorks on the market. Matt Lombard’s in-depth knowledge plus his snappy wit and wisdom make SolidWorks accessible to users at all levels.”
— Mike Sabocheck, Territory Technical Manager, SolidWorks Corporation
The most comprehensive single reference on SolidWorks
Whether you’re a new, intermediate, or professional user, you’ll find the in-depth coverage you need to succeed with SolidWorks 2007 in this comprehensive reference. From customizing the interface to exploring best practices to reinforcing your knowledge with step-by-step tutorials, the techniques and shortcuts in this detailed book will help you accomplish tasks, avoid the time-consuming pitfalls of parametric design, and get a firm handle on one of the leading 3D CAD programs on the market.
* Customize the user interface and connect hotkeys to macros
*Create sketches, parts, assemblies, and drawings
*Build intelligence into parts
*Work with patterns, equations, and configurations
*Learn multibody, surface, and master model techniques
*Write, record, and edit Visual Basic(r) macros
Design with advanced 3D features
Download:

depositfiles.com

easy-share

letitbit

Rapidshare

Read Full Post »

Robot Asisten Di Dunia Kedokteran.

Implementasi Robot sebagai asistensi pada saat pengopeerasian di dunia kedokteran. Artikel ini lumayan menarik. Masa depan aplikasi robotik untuk dunia kedokteran. Sedikit bahasa inggris dibawah, silahkan baca, semoga menambah wawasan kita.

In an attempt to improve precision and individualize patient care, some surgeons are looking to computer navigation and robotics for total joint replacement.

At the 9th Annual Advances in Arthritis, Arthroplasty and Trauma Course, Michael J. Fracchia, MD, and Frank Lampe, MD, discussed the latest developments in robotics and computer navigation. Navigation has opened up a whole new world. The recording of real-time objective data will help us with the design, implantation and longevity [of implants].

German researchers are using ultrasound to define the anterior pelvic plane, and the technology could be used in a similar way to aid surgeons performing minimally invasive total knee arthroplasty (TKA).

Surgeons may also incorporate the 3-D laser scanning techniques that are currently used in the automotive industry.

Damaging reports in the media, unfavorable scientific results and a leading court decision noting a higher incidence of complications in robotic-assisted surgery has caused modified industrial robots to vanish from German operating rooms. However, Lampe said that he believes these systems will return if they are time- and cost-effective and safe.

The modiCAS is one robotic system designed for total hip arthroplasty

They should be passive or semi-active, rather than active autonomous systems, and they should provide additional benefits compared to pure navigation.

Robotic systems can be classified into the following categories:

* active, in which the robot executes segments of the procedure;
* semi-active, where the surgeon performs the operation, but is guided by the robot; and,
* passive, in which the robot does not actively execute any segment of the operation.

Disini terlihat tangan robot yang sedang digunakan pada saat operasi kedokteran.

Many companies are developing robotic surgical systems for TJR. Lampe said the modiCAS (modiCAS Ltd.) is a semi-active system developed for total hip arthroplasty. Optical navigation tracks the patients and no patient fixation is necessary. Researchers in Germany are conducting a clinical trial using the system for cup implantation.

More systems

The Acrobot Sculptor (Acrobot), a hands-on, semi-active system, is undergoing clinical investigation for unicondylar knee arthroplasty (UKA).

Similarly, the Makoplasty (Mako Surgical Corp.) system is semi-active and developed for UKA. The surgeon performs bone sculpting using a burr, but receives tactile guidance from a robotic arm.

Salah satu capture display tampilan pada software untuk robot kedokteran.

The Bone Resection Instrument Guide (BRIGIT, Zimmer) is a passive system used for TKA. The only thing that the robot does is position manual cutting guides, and then the cutting is performed manually by the surgeon.

Meanwhile, American researchers from Carnegie Mellon University have developed the miniature, bone-attached robotic system (MBARS) for patellofemoral joint replacement.

[It] is a small bone-mounted, active mini-robot using the parallel hexapod technique. iI is preoperative planning is carried out and no patient tracking is necessary because it is fixed to the bone.

In addition, the Praxiteles (Praxim, Medivision) system is a bone-mounted, passive, mini robot developed for MIS TKA. The system also uses a bone-milling technique that incorporates a passive guide and side-milling tool, Lampe said.

Read Full Post »